Cleaning glued iron: that's how it works | 7 home remedies

• Clean the iron
  • Prevent
  • home remedies

A sticky iron is annoying, inefficient, and consumes even more power because it needs to be ironed longer to get a good result. Over time, deposits accumulate on the sole of the iron, which burn in more and more and noticeably reduce the performance. Appropriate home remedies help to clean a glued iron and use it again efficiently for ironing.

Clean the iron

You must clean your iron because the sole is glued from top to bottom "> Prevent

If your iron is not yet glued, you should ensure that this does not happen. Irons can be cleaned easily after use, so that no dirt can accumulate and seep into the material on the next use. The following tips will help you.

1. Wipe excess water and dirt off the sole after ironing. This will prevent particles from settling which will heat up and burn in during the next use. For this, it is best to use a linen or cotton cloth, as these materials withstand high temperatures and are difficult to burn.

2. It is advisable not to iron soiled laundry. Even if your shirt is only lightly soiled, the dirt burns into the iron and thus ensures sticky areas. Only freshly laundered lint-free laundry should be ironed to prevent deposits. Likewise, you should not iron with a dirty iron, as this can damage the laundry.

3. When ironing, always make sure not to iron sensitive or synthetic fabrics too hot . If you do not turn silk to the left and iron at over 160 ° C or acrylic at over 140 ° C, be sure to get burnt dirt. The following list gives you an overview of the possible ironing temperatures in relation to the material.

material	ironing temperature
cotton	180 ° C - 200 ° C
Wool	160 ° C - 180 ° C
silk	130 ° C - 160 ° C, should be turned to the left
linen	200 ° C - up to 220 ° C
nylon	130 ° C - 140 ° C
leather	120 ° C - 130 ° C
acetate	120 ° C - 140 ° C
polyamide	180 ° C - 200 ° C
polyester	150 ° C - 170 ° C
polyacrylic	100 ° C - 130 ° C
viscose	130 ° C - 160 ° C, should be turned to the left
cashmere	160 ° C - 180 ° C

If you follow these tips, you can save yourself a lot of trouble in the long run. Above all, the wrong ironing temperature is often the trigger for burned or glued, since not all fabrics are as resistant as cotton or linen.

Tip: Never use sharp objects such as knives, screwdrivers or wire wool over the sole of the iron. Even in small scratches accumulates dust and dirt, which means that the surface is even more difficult to clean.

home remedies

7 Home remedies to clean a sticky iron

If you need to clean your already-glued iron and simple methods such as water or a towel are no longer sufficient, you should rely on home remedies . These work efficiently against the dirt that has burned into the material and are also easy to obtain in a short time. Note that you can use these methods either when the iron has completely cooled or needs to be heated depending on your home remedy.

lemon juice

Lemon juice is one of the classic home remedies par excellence and lends itself well to clean an iron and to solve burned-in. Lemon juice is well suited as a means for coated irons, since the acid does not cause scratches compared to other cleaners. These are usually models that are coated with Teflon. Salt, for example, would be fatal in these soles, as the crystals lead to deep scratches within a few moments. For the application of lemon juice you need either a fresh lemon or concentrate, a cotton cloth and a microfibre cloth.

Proceed as follows:

• put the lemon juice in a bowl
• Dip microfiber cloth into the juice
• one corner is usually enough
• Now treat the dirty area with the juice
• use more force depending on the degree of soiling
• but do not rub too hard
• after a short time, the dirt dissolves
• continue until the sole is clean
• While doing so, always dab the cloth in the juice
• Finally, rub with a dry cloth

A great advantage of this method is the lemon fragrance after cleaning. This will last even until the next ironing, which gives your wardrobe a fresh citrus note.

oven cleaner

Oven spray is good for uncoated iron and is particularly easy to apply, even if the dirt layer is particularly thick. You can use any type of oven cleaner for this, but you may want to go to the balcony or garden for more aggressive products. You only need two cotton towels for the application in addition to the oven spray.

1. Turn on the iron and set it to a heat that you can still easily touch with your finger without burning. Heat is needed to use the oven spray.

2. Now spray the spray according to the manufacturer's instructions, but at least from a distance of 30 centimeters, directly onto the sole. Wait for a reaction time of a few minutes.

3. The spray should have dissolved the dirt after some time, so you only have to drive over the sole with a cotton cloth. If there is any remaining dirt, simply repeat the procedure as often as necessary. For highly bonded irons, multiple applications are often needed.

4. Finally, polish the sole with the second cotton towel. This allows it to easily slide over the garments without damaging them.

scraper

A classic scraper for ovens with ceramic hobs is well suited for stains caused by burnt clothing. Use this when your glued iron has cooled. When using, just be careful not to scratch the surface. For this reason, never use on coated models.

Tip: Never scrape off the dirt with a fork or a knife. This causes scratches that cause just the opposite of what you actually want to achieve.

eraser

For very light soiling, sometimes a simple eraser is enough. The advantage: erasers can be used on all models, with or without coating. Of course, the device must be switched off for this, otherwise it will burn.

Salt and butter

A glued iron can be cleaned with a mixture of butter and salt if it is not coated. Mix soft butter with salt in a 2: 1 ratio and gently apply the mixture . Rub the mixture on the sole without heavy pressure and then wipe it off with a cotton cloth. Heat the iron and drive over it until butter is no longer on the sole.

vinegar

Vinegar is used to clean the clogged nozzles of the iron. A cotton cloth is soaked in brandy vinegar, wrung out and the cold iron placed on it for ten minutes. It is then raised again and a cotton swab dipped in vinegar is used to clean the individual nozzles. Be careful not to put the rods too deep in the jets. Then wipe the underside with a cloth.

aluminum foil

Yes, aluminum foil is great for cleaning an iron. The film is used when the iron no longer slides easily over the laundry and seems to resist resistance. In this case, it is an extremely thin layer of dust that has settled. With a piece of aluminum foil in the length of at least 50 centimeters you move this in a few seconds to body.

• cut the aluminum foil
• put this on the ironing board
• set the iron to the highest level
• Now drive over the aluminum foil several times in all directions
• it will dissolve black particles
• These adhere to the aluminum foil

Drive the iron over the aluminum foil as long as necessary. Depending on the degree of soiling, the entire film can be black afterwards, but your iron is clean again.